There are 4 ways to highlight the featured dancer automatically during their Canon cycle. It is a way to make them stand out from the other dancers and draw the audiences attention to them.
AutoGlow
AutoFade
AutoColor
AutoChat
Auto values have an IN and OUT value. The IN value is the value assigned at the BEGINNING of their Canon Cycle. The OUT value is the value assigned a the END of their Canon Cycle.
There is also an AutoOn and AutoOff for each of the 4 types of Autos. AutoOn enables and AutoOff disables.
To enter the AutoGlowAmount (IN/OUT) values, access it from menu via the [Options]–>AutoGlow The 1st value entered is the IN value. The 2nd value entered is the OUT value. Separate the 2 values using a comma (,).
then you get this text box. Enter 2 values separated by a comma.
NOTE: AutoGlow is the only Auto that REQUIRES you set the AutoGlow values BEFORE turning it on using AutoOn. AutoOn (and AutoOff) send the values to the dancers (animesh/poseball)
For Menu access to GlowAutoOn and GlowAutoOff, use [Groupings]–>[AutoCanon]
So a bit of button pressing is involved when EXPERIMENTING.
BUT..
You can accomplish the same thing efficiently using notecards.
PREPFORM
1,AutoGlowAmount%0.5%0,AutoGlowOn,Canon%Home
OR
Sequencer
1,AutoGlowAmount,0.5,0 | 0
2,AutoGlowOn | 0.1
3,Canon,Home | 2
To execute the PrepForm from AutoFX:
1,SD=PREPFORM,1
To execute the SD Sequencer from AutoFX:
1,SD=READ_AND_PLAY_SD_SEQ
To execute the PREPFORM from the Sequencer:
1,PrepForm,1